BH系列热保护器

BH series thermal protector
 

说明及应用 Instructions and applications

BH-B-K系列热保护器,广泛用于1.5马力以下的各类马达电机、照明灯具、逆变电焊机、开关电源、电热器具等电器设备,防止因过热过流而产生的非正常工作提供有效可靠的安全保护、报警装置。加强型外壳适用于塑封电机内置式安装,可承受3.5MPa的塑料成型工艺压力。

BH-B-K series thermal protectors ,effective reliable security protector and alarm devices,are widely used in various types 1.5 horsepower motors, lighting device,inverter welding machine,switch power,electric appliances and other electric equipment to prevent from over-current & over-heating caused by abnormal work status. Enforced types that can withstand pressure of 3.5MPa are fit for build-in-installation of plastic coated motor.

原理及结构  Principle and structure

BH系列热保护器是一种温度自动回复装置。当电流通过有阻抗的双金属元件,无需任何辅助机构,仅靠双金属片自身感温和电流效应,使双金属片发生状态中的快速变化,从而断开电路或接通电路,达到过流过热双重保护功能,解决了电流突然增大时,温度感应滞后的问题,该产品内阻小,无噪声,密封牢固,具有比通常保护器,更安全可靠的特点。

BH series that can protecte against over-current and over-temperature are sealed firmly,small internal resistance,no noise and reset automatically. When current through bimetal that are sensitive to temperature and current, the status of the bimetal will be changed by over-temperature or over-current to cut off circuit or switch on circuit. BH series are safer than normal protectors,as there is no temperature effect lag under condition of sudden big current.

结构图  FIGURE

触点容量  Contact capacity


BH系列在下述条件下可保护5000次以上。

The endurance life of BH SEIRES can be more than 5000 cycles under following conditions.

型号规格说明  Instructions for model and specification       

BH-× ×× ×××℃

温度规格Code for action temperature
                            外形代码 Code for outline
                            产品型号 Products type

A-℃曲线图  A-C Curve


 

临界脱扣电流与环境温度曲线(选择保护温度时间应同时考虑电流效应)。

Cure for critical trip current VS ambient temperature ( Please consider the current effect, when choosing the protection temperature).


温度规格  Temperature specifications

动作温度:(50~150)±5℃;每5℃一档;
Open temperature: (50~150)±5℃; 5℃ a step.
复位温度:为标准动作温度的2/3,公差为±15℃,或按客户要求
制作;
Reset temperature: 2/3 of the action temperature with
tolerance of ±15℃. Reset temperature can also be provided
according to customers' requirement.

产品型号  Product model

注意事项  Notice

1.BH-A1D外壳是金属导电体,在使用时须配置有导热耐温的绝缘套管;

BH-A1D must be equipped insulation sleeve, as its metal case is
conductor.

2.BH-B2D适用于塑封马达的外置式安装形式;

BH-B2D can fit for external installation of plastic coated motor.

3.热保护器在安装使用过程中不能承受强烈冲击力;

Do not striked when installation.

额定动作温度和复位温度对照表  Table for rated action temperature and reset temperature

 


卡斯特网络:全讯网 www.xflbdcylc.com、全讯网新2 www.yulecheng9988.com、全讯网首页 www.zgzqw88.com、全讯网2 www.zgzcw66.com、新全讯网 www.zqbfzbw.com、新全讯网2 www.xamdcylc.com、全讯网新 www.amdc678.com、全讯网导航 www.taiyangcheng678.com、五湖四海全讯网 www.xsjylcw.com、凤凰全讯网 www.txzqzbw.com






 

版权所有:常州市远达科技研究所

电话:+86-519-85128778    传真:0519-86321583    邮箱:yd882592@pub.cz.jsinfo.net    技术支持:麦点广告